Square Clamps (Flat Conductor/Hot Stamped Design)
Square Clamps (Flat Conductor/Hot Stamped Design)
Square Clamps are designed for a four-way connection and are suitable for crossing over tapes, straight through joints, or ‘T’ connections to form a continuous network of tapes. Countersunk hole in the base for fixing the clamp in place. BS62305 hot-stamped design is a new feature to our original Square Clamps (Flat Conductor).
More Information:
Square Clamps permit neat joints on PVC covered lightning protection conductors due to the recessed lid.
When choosing a connector it is important to ensure:
• The connector is mechanically robust.
• The connector is selected according to its application.
• The connector is rated for its application.
• To avoid bimetallic corrosion: use a bimetallic connector (do not connect bare copper directly to bare aluminium, or have water run-off from copper fall onto aluminium).
Features:
Material: Aluminium/Copper Alloy
Standard: BS:EN 62561-1, Class H
Tightening torque: 6Nm
| CONDUCTOR SIZE (mm) | CONDUCTOR MATERIAL | WEIGHT (kg) | PART NO. |
| 25 x 3 | Aluminium | 0.05 | SQCAF253 |
| 25 x 3 | Copper | 0.15 | SQCCF253 |
| 25 x 6 | Copper | 0.19 | SQCCF256 |
| 31 x 3 | Copper | 0.22 | SQCCF313 |
| 31 x 6 | Copper | 0.22 | SQCCF316 |
| 40 x 6 | Copper | 0.79 | SQCCF406 |
| 50 x 6 | Copper | 0.35 | SQCCF506 |