Cable Test Clamp
Cable Test Clamp
Cable Test Clamps are used to form a disconnecting joint between the lightning protection Down Conductor System and the Earthing System. The conductors overlap end to end and secure together using two bolts.
More Information:
When choosing a connector it is important to ensure:
• The connector is mechanically robust.
• The connector is selected according to its application.
• The connector is rated for its application.
• To avoid bimetallic corrosion: use a bimetallic connector (do not connect bare copper directly to bare aluminium, or have water run-off from copper fall onto aluminium).
Features:
Material: Gunmetal
Standard: BS:EN 62561-1, Class H
Tightening Torque: 6Nm
| CONDUCTOR SIZE (mm) | CONDUCTOR MATERIAL | WEIGHT (kg) | PART NO. |
| 50 | Copper | 0.40 | TC50 |
| 70 | Copper | 0.40 | TC7O |
| 90 | Copper | 0.40 | TC9O |